Ready-Mixed Poultices

Ready-Mixed Poultices

Restorative Latex Cleaning Poultice, Standard

17 kg

For internal use.

Standard based natural latex poultice, supplied in a range of cleaning 'strengths' A-E.

Brush, roller or spray applied. Peel off.

Dwell
Normal dwell time 12-24 hours
Coverage
Apply to a thickness of approx 0.25-0.5kg per square metre for flat surface profile. Apply to a thickness of approx 0.5-1kg per square metre for detailed surface profile
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Latex Cleaning Poultice, Low Ammonia

15 kg

For internal use.

Reduced ammonia-based natural latex poultice supplied in a range of cleaning 'strengths' A-E.

Brush, roller or spray applied. Peel off.

Dwell
Normal dwell time 12-24 hours
Coverage
Apply to a thickness of approx 0.25-0.5kg per square metre for flat surface profile. Apply to a thickness of approx 0.5-1kg per square metre for detailed surface profile
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Monumentique Paste C Heavy Duty Latex Paste

10 kg

EDTA-based heavy-duty cleaning paste for mobilising soiling and staining.

Trowel application. Peel off.

Dwell
N/A
Coverage
N/A
Storage
N/A

Restorative Copper Stain Poultice

10 kg or 20 kg

Activated clay-based poultice for the drawing of copper salts from masonry.

Dwell
Allow the poultice to draw the stain for a period of 12-24 hours
Coverage
Apply a thickness of approximately ≤ 5mm per application to the stained areas (5mm application equates to approx 6kg per square metre)
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Standard Ammonium Carbonate Poultice

10 kg or 20 kg

Commercial grade ammonium carbonate poultice.

Pre-mixed for convenience. Available in strengths of 2%, 5% or 10%.

Dwell
1-24 hours. Working temperature 10-25C
Coverage
1.2kg per 1mm thickness per square metre (e.g. 5mm thickness equates to 6kg per square metre)
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative 'Clay-Free' Ammonium Carbonate Poultice

20 kg

Special recipe, low rinse, activated poultice for converting carbon sulphation / gypsum crust.

Trowel application.

Dwell
Restorative Ammonium Carbonate Poultice is used for cleaning masonry, primarily for the softening of ‘Carbon Sulphation’ deposits. This poultice contains fumed silica in an ammonium carbonate solution. The material is not classified as hazardous however the product gives off ammonia vapour and should be used in a well ventilated area. PPE must include gloves and eye protection. Use clean water to remove in the event of skin contact. Respiratory protection will require a cartridge suitable for ammonia vapour. Refer to HSDS & Technical
Coverage
N/A
Storage
The product is non hazardous. Store in closed / air tight containers and protect from frost. Do not allow into a water course.

Restorative 'Browning' Poultice

10 kg

Activated clay-based poultice for the removal of ‘browning out’ and gypsum films.

Trowel / float application.

Dwell
Before Use: Refer to Method Statements, including MSDS for safety advice. Protect and or mask adjacent sensitive areas. Remove loose surface deposits with a stiff nylon brush - Not a metal wire brush. Mix the product, including any surface liquid into the paste before use.
Coverage
Application: Once thoroughly mixed, apply with a plastic or stainless steel tool to a thickness of approximately 0.5cm to the stained areas. Cover the applied product with polythene or similar plastic material to prevent the poultice from becoming dried or washed off, during the active period. Allow the poultice to draw the stain for a period of 6-24 hours, before gently removing the residues with a plastic tool, scraper or brush and then washing the area down. Repeat as necessary.
Storage
Precautions: This product contains Tetrapotassium Pyrophosphate, use gloves and wash hands thoroughly. Irritating to eyes and skin. Wear suitable gloves and eye protection when both opening and using product. In the event of contact with eyes, wash immediately and continuously with copious amounts of clean water. Use in a well ventilated area. If in contact with skin, wash promptly with clean water. If symptoms persist seek medical advice and show this label. Avoid contact with strong Alkalies, Silver. If poultice is left unattended, restrict unauthorised access and prevent tampering to product.

Restorative Iron Stain Poultice

10 kg

Activated clay-based poultice for the removal of iron oxidation staining.

Dwell
Allow the poultice to draw the stain for a period of 6-24 hours
Coverage
Apply a thickness of approximately ≤ 5mm per application to the stained areas (5mm application equates to approx 6kg per square metre)
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Silicone Poultice

10 kg

Ready Mixed Poultice product for the removal of silicone leaching in masonry, from mastic staining.

Dwell
The working temperature should be between 2-25°C. Dwell time is normally in the range of 10-30 minutes. Remove while paint remains in a softened condition
Coverage
A thickness of approximately 4mm equates to approximately 6kg of softener per square metre
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Want to know more?

Please answer the Captcha below before submitting the form