Graffiti products

Restorative Graffiti Remover

5 Litre

Multi-purpose, low hazard graffiti remover.

Dwell

The working temperature should be between 6-25°C. Dwell time is normally in the range 30-60mins. Higher ambient temperature and thinner graffiti coatings require shorter time

Typical Coverage

0.5 Litre per square metre

Storage

Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Ghosting Remover (Concentrate)

5 Litre

Alkaline cleaning product that is excellent for the removal of residual graffiti 'ghosting'.

Dwell

Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Typical Coverage

Approximately 5-10 square metres per litre

Storage

Allow 2 minutes dwell time only

Restorative Anti-Graffiti Coating

20 kg

Water-based microcrystalline wax emulsion.

Micro-porous and sacrificial (can be removed with hot water or steam).

Apply to natural stone, brick, concrete & timber with minimal change in appearance.

Brush, roller or spray applied.

Dwell

This is a sacrificial product which is applied and left. If removal is required it yields under temperature with superheated water / steam

Typical Coverage

Usually 2-4 square metres per litre, depending upon porosity and absorbency of target surfaces. It is recommended that 2 coats are normally applied

Storage

Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Marker Pigment Remover (Felt Tip Remover)

5 kg

Hypochlorite-based, activated clay product.

For the removal of marker pen pigments.

Dwell

12-24 hours. Working temperature 10-25C

Typical Coverage

5kg per square metre @ 4mm thickness

Storage

Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Paint Softener - 'Rapid'

10 kg

A thixotropic gel for softening all resinous paints including graffiti.

Alcohol + solvent-based – increased precautions apply.

For indoor and outdoor use.

Water miscible. Brush application.

Dwell

The working temperature should ideally be between 6-25°C. Dwell time is normally in the range 2-8 hours. Higher temperature and thinner paint coatings require shorter time. For convenience, longer dwell can be employed. If insufficient product is used, or dwell time is excessive, application of the softener must be repeated. This 'top up' coat will absorb more quickly and the dwell time reduced to 1-3 hours

Typical Coverage

A thickness of 0.5mm equates to 0.5 Litre of softener per square metre

Storage

Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative After-Rinse

5 Litre

Acetic acid after-wash to neutralise ‘Ghosting Remover’ and remove lime efflorescence.

Brush or spray application

Dwell

N/A

Typical Coverage

N/A

Storage

Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Graffiti products