Chemical & Poultice Products

Paint Removers

Restorative Paint Softener - Acrylic Type

20 kg

A thixotropic gel for softening 'plasticised' masonry and emulsion paints, 'hammered finish' and some car paints.

Suitable for internal and external use, it is highly water-soluble.

Brush, roller or spray applied.

Dwell
The working temperature should ideally be between 6-25°C. Dwell time is normally in the range 2-8 hours. Higher temperature and thinner paint coatings require shorter time. For convenience, longer dwell can be employed. If insufficient product is used, or dwell time is excessive, application of the softener must be repeated. This 'top up' coat will absorb more quickly and the dwell time reduced to 1-3 hours
Typical Coverage
A thickness of 0.5mm equates to 0.5 Litre of softener per square metre
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Paint Softener - Polyurethane / Oil Type

20 kg

A mildly alkaline thixotropic cream for softening polyurethane and oil based household gloss and alkyd based masonry paints.

May be used internally or externally, and is water soluble.

Brush, roller or spray applied.

Dwell
The working temperature should ideally be between 6-25°C. Dwell time is normally in the range 2-8 hours. Higher temperature and thinner paint coatings require shorter time. For convenience, longer dwell can be employed. If insufficient product is used, or dwell time is excessive, application of the softener must be repeated. This 'top up' coat will absorb more quickly and the dwell time reduced to 1-3 hours
Typical Coverage
A thickness of 0.5mm equates to 0.5 Litre of softener per square metre
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Paint Softener - 'Rapid'

10 kg

A thixotropic  gel for softening all resinous paints including graffiti.

Alcohol + solvent based – increased precautions apply.

For indoor and outdoor use. Water miscible.

Brush application.

Dwell
The working temperature should ideally be between 6-25°C. Dwell time is normally in the range 2-8 hours. Higher temperature and thinner paint coatings require shorter time. For convenience, longer dwell can be employed. If insufficient product is used, or dwell time is excessive, application of the softener must be repeated. This 'top up' coat will absorb more quickly and the dwell time reduced to 1-3 hours
Typical Coverage
A thickness of 0.5mm equates to 0.5 Litre of softener per square metre
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Cement / Lime Paint Remover

10 / 20 kg

A hydrochloric acid gel designed primarily for use on historic brickwork.

Strong acidic gel for the removal of cement based paint and calcified lime from brickwork. 

Dwell
Leave to gel for 3-5 minutes and agitate again
Typical Coverage
A thickness of 0.5mm equates to 0.5 Litre of softener per square metre
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight. This product is not sold without prior consultation. Please contact 01454 417831

Graffiti products

Restorative Graffiti Remover

5 Litre

Multi-purpose, low hazard graffiti remover.

Dwell
The working temperature should be between 6-25°C. Dwell time is normally in the range 30-60mins. Higher ambient temperature and thinner graffiti coatings require shorter time
Typical Coverage
0.5 Litre per square metre
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Ghosting Remover (Concentrate)

5 Litre

Alkaline cleaning product that is excellent for the removal of residual graffiti 'ghosting'.

Dwell
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight
Typical Coverage
Approximately 5-10 square metres per litre
Storage
Allow 2 minutes dwell time only

Restorative Anti-Graffiti Coating

20 kg

Water-based microcrystalline wax emulsion.

Micro-porous and sacrificial (can be removed with hot water or steam).

Apply to natural stone, brick, concrete & timber with minimal change in appearance.

Brush, roller or spray applied.

Dwell
This is a sacrificial product which is applied and left. If removal is required it yields under temperature with superheated water / steam
Typical Coverage
Usually 2-4 square metres per litre, depending upon porosity and absorbency of target surfaces. It is recommended that 2 coats are normally applied
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Marker Pigment Remover (Felt Tip Remover)

5 kg

Hypochlorite-based, activated clay product.

For the removal of marker pen pigments.

Dwell
12-24 hours. Working temperature 10-25C
Typical Coverage
5kg per square metre @ 4mm thickness
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Paint Softener - 'Rapid'

10 kg

A thixotropic gel for softening all resinous paints including graffiti.

Alcohol + solvent-based – increased precautions apply.

For indoor and outdoor use.

Water miscible. Brush application.

Dwell
The working temperature should ideally be between 6-25°C. Dwell time is normally in the range 2-8 hours. Higher temperature and thinner paint coatings require shorter time. For convenience, longer dwell can be employed. If insufficient product is used, or dwell time is excessive, application of the softener must be repeated. This 'top up' coat will absorb more quickly and the dwell time reduced to 1-3 hours
Typical Coverage
A thickness of 0.5mm equates to 0.5 Litre of softener per square metre
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative After-Rinse

5 Litre

Acetic acid after-wash to neutralise ‘Ghosting Remover’ and remove lime efflorescence.

Brush or spray application

Dwell
N/A
Typical Coverage
N/A
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Ready-Mixed Poultices

Restorative Latex Cleaning Poultice, Standard

17 kg

For internal use.

Standard based natural latex poultice, supplied in a range of cleaning 'strengths' A-E.

Brush, roller or spray applied. Peel off.

Dwell
Normal dwell time 12-24 hours
Coverage
Apply to a thickness of approx 0.25-0.5kg per square metre for flat surface profile. Apply to a thickness of approx 0.5-1kg per square metre for detailed surface profile
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Latex Cleaning Poultice, Low Ammonia

15 kg

For internal use.

Reduced ammonia-based natural latex poultice supplied in a range of cleaning 'strengths' A-E.

Brush, roller or spray applied. Peel off.

Dwell
Normal dwell time 12-24 hours
Coverage
Apply to a thickness of approx 0.25-0.5kg per square metre for flat surface profile. Apply to a thickness of approx 0.5-1kg per square metre for detailed surface profile
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Monumentique Paste C Heavy Duty Latex Paste

10 kg

EDTA-based heavy-duty cleaning paste for mobilising soiling and staining.

Trowel application. Peel off.

Dwell
N/A
Coverage
N/A
Storage
N/A

Restorative Copper Stain Poultice

10 kg or 20 kg

Activated clay-based poultice for the drawing of copper salts from masonry.

Dwell
Allow the poultice to draw the stain for a period of 12-24 hours
Coverage
Apply a thickness of approximately ≤ 5mm per application to the stained areas (5mm application equates to approx 6kg per square metre)
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Standard Ammonium Carbonate Poultice

10 kg or 20 kg

Commercial grade ammonium carbonate poultice.

Pre-mixed for convenience. Available in strengths of 2%, 5% or 10%.

Dwell
1-24 hours. Working temperature 10-25C
Coverage
1.2kg per 1mm thickness per square metre (e.g. 5mm thickness equates to 6kg per square metre)
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative 'Clay-Free' Ammonium Carbonate Poultice

20 kg

Special recipe, low rinse, activated poultice for converting carbon sulphation / gypsum crust.

Trowel application.

Dwell
Restorative Ammonium Carbonate Poultice is used for cleaning masonry, primarily for the softening of ‘Carbon Sulphation’ deposits. This poultice contains fumed silica in an ammonium carbonate solution. The material is not classified as hazardous however the product gives off ammonia vapour and should be used in a well ventilated area. PPE must include gloves and eye protection. Use clean water to remove in the event of skin contact. Respiratory protection will require a cartridge suitable for ammonia vapour. Refer to HSDS & Technical
Coverage
N/A
Storage
The product is non hazardous. Store in closed / air tight containers and protect from frost. Do not allow into a water course.

Restorative 'Browning' Poultice

10 kg

Activated clay-based poultice for the removal of ‘browning out’ and gypsum films.

Trowel / float application.

Dwell
Before Use: Refer to Method Statements, including MSDS for safety advice. Protect and or mask adjacent sensitive areas. Remove loose surface deposits with a stiff nylon brush - Not a metal wire brush. Mix the product, including any surface liquid into the paste before use.
Coverage
Application: Once thoroughly mixed, apply with a plastic or stainless steel tool to a thickness of approximately 0.5cm to the stained areas. Cover the applied product with polythene or similar plastic material to prevent the poultice from becoming dried or washed off, during the active period. Allow the poultice to draw the stain for a period of 6-24 hours, before gently removing the residues with a plastic tool, scraper or brush and then washing the area down. Repeat as necessary.
Storage
Precautions: This product contains Tetrapotassium Pyrophosphate, use gloves and wash hands thoroughly. Irritating to eyes and skin. Wear suitable gloves and eye protection when both opening and using product. In the event of contact with eyes, wash immediately and continuously with copious amounts of clean water. Use in a well ventilated area. If in contact with skin, wash promptly with clean water. If symptoms persist seek medical advice and show this label. Avoid contact with strong Alkalies, Silver. If poultice is left unattended, restrict unauthorised access and prevent tampering to product.

Restorative Iron Stain Poultice

10 kg

Activated clay-based poultice for the removal of iron oxidation staining.

Dwell
Allow the poultice to draw the stain for a period of 6-24 hours
Coverage
Apply a thickness of approximately ≤ 5mm per application to the stained areas (5mm application equates to approx 6kg per square metre)
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Silicone Poultice

10 kg

Ready Mixed Poultice product for the removal of silicone leaching in masonry, from mastic staining.

Dwell
The working temperature should be between 2-25°C. Dwell time is normally in the range of 10-30 minutes. Remove while paint remains in a softened condition
Coverage
A thickness of approximately 4mm equates to approximately 6kg of softener per square metre
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Poultice Components

Restorative Additive for Latex Cleaning Poultice

17 kg

Used as an additive to increase the strength of a latex cleaning poultice.

Dwell
Normal dwell time 12-24 hours
Coverage
For use with Latex Poultice products
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Working temperature range from 5-20C. Avoid direct sunlight.

Restorative Wetting Agent

An alcohol based surfactant.

Can be used diluted with tap water, or as an additive to poultices and other solvent based cleaning methods.

Dwell
N/A
Coverage
N/A
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Sepiolite Clay

25 kg

Finely ground Spanish Sepiolite clay.

Used in a wide variety of poultice applications.

Dwell
Dwell times will vary depending on the strength of poultice/target application. Please call 01454 417831 for guidance
Coverage
N/A
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Ammonium Carbonate Granules

25 kg

Commercial grade ammonium carbonate.

Used in a wide variety of poultice applications.

Dwell
Dwell times will vary depending on the strength of poultice/target application. Please call 01454 417831 for guidance
Coverage
N/A
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Working temperature range from 5-20C. Avoid direct sunlight.

Restorative Arbocel BC1000 Cellulose Fibre

15 kg

Long fibre, cellulose 'paper pulp'.

Used in a wide variety of poultice applications.

Dwell
Dwell times will vary depending on the strength of poultice/target application. Please call 01454 417831 for guidance
Coverage
N/A
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative 200-grade Cellulose Fibre

20 kg

Short fibre, ‘paper pulp’.

Paste thickener.

Dwell
N/A
Coverage
N/A
Storage
N/A

Restorative Carboxy-methyl Cellulose

1 kg

Gelling or thickening additive.

Dwell
Dwell times will vary depending on the strength of poultice/target application. Please call 01454 417831 for guidance
Coverage
N/A
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Citric Acid Granules

5 kg

Commercial grade.

Mild acid / sequestering agent.

Dwell
N/A
Coverage
N/A
Storage
N/A

Fumed Silica Powder

10 kg

Special thickener.

Dwell
N/A
Coverage
N/A
Storage
N/A

Cleaning Liquids / Gels

Restorative EDTA Cleaning Gel

10 kg

Mild gel for the cleaning of internal marble and alabaster.

Brush, spray or roller application.

Dwell
Before use: Refer to Method Statements, inc MSDS for safety advice. Avoid all contact with skin and follow PPE advice in HSDS. When diluting, add product to the water not water to product.
Coverage
Application: Normally brush applied to a thickness approx 0.3-0.5kg m² for cleaning (1/3 – ½ mm thickness and up to 1kg m² (1mm) for calcified lime etc.
Storage
Cleaning: During application, go back over the area within 1-2 minutes, scrub over the work area with an appropriate brush in a firm swirling action, to observe if soiling is being mobilised. Check periodically until the amount of soiling is 'on the move' appropriate to the degree of clean required. With light, sooty soiling this may be as little as 4-5 minutes. If water affected or more deeply stained, this may take up to 1-2 hours and then require a second application but still best to check periodically i.e at 2-4 minutes, 8 Minutes, 15 minutes, 45 minutes, 1½ hours. Cooler temperatures will slow the reaction, but use of a heat source will dry the gel too quickly. Allow to naturally dry. After dwell (can be upto 2hrs), remove thoroughly with a sponge and warm water. For fine or detail work, use of a dry steam unit and sponge may be useful to ensure that gel and residue are mobilised and removed from crevices. Greatest caution should be taken with polished surfaces such as Marble, to not allow an excessive dwell. Where wax has been used, this will require vigorous brushing, with a fairly stiff bristle (not wire) brush. Calcified Lime Removal: Similar initial precautions but will normally require full dwell time (perhaps 3 hours, if not already dried) and then repeat application. Once deposit is starting to soften up, use of a fine bronze wire brush or similar may prove useful. Remove with sponge and water.

Restorative Peroxide Gel

10 kg

Hydrogen peroxide gel for removal of discoloration from marble and other stones.

Brush or roller application.

Dwell
Before Use: Refer to Method Statements, inc MSDS for safety advice. Avoid all contact with skin and follow PPE advice in HSDS. When diluting, add product to the water not water to product.
Coverage
Application: Pre-wet porous surfaces with water before use. Commencing at the uppermost level, apply with brush or by flow application. Agitate regularly with a brush to ensure reaction and top up as necessary. Rinse thoroughly with a hot water pressure washer - Do not allow to dry without rinsing.
Storage
Precautions: Product produces a choking and corrosive fume. Use only in a well ventilated area. Wear suitable mask, gloves and eye protection when opening, dispensing and using product. Protect metal and plastic surfaces from contact. Secure product when unattended.

Restorative 'Complex' Paste (Versions P1-P5)

10 kg

EDTA-based sequestering agent.

Used for removal of soot, water induced staining and metal staining, principally from interior stonework but also some external applications.

Also used for controlled removal of salts and oxidation from metal substrates including those of lead and copper.

Dwell
Dwell time in the range 5 minutes for light soot to 2 hours (including topping-up application) for ingrained staining. Check process regularly by 'swirling' the surface with a paint brush i.e. 24minutes, 8 minutes, 15 minutes, 45 minutes
Coverage
Normally brush applied to thickness approx 0.2-0.5kg per square metre for cleaning (0.25-0.5mm thickness) and up to 1kg per square metre (1mm) for calcified lime etc
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Mild pH Façade Cleaner (Concentrate)

20 litre

A pH Neutral detergent for masonry cleaning.

Dwell
10-60 minutes
Coverage
Diluted product - the coverage rate is between 4-8 square metre per litre, depending upon porosity and absorbency or target surfaces
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Complex Gel

10 kg

A single strength gel, used for light duty cleaning including Marble.

Dwell
Dwell time may be within 2-5 minutes. Deeper staining may take up to an hour and then require a second application but best to check regularly
Coverage
A thickness of approx 0.3-0.5kg per square metre
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative ThermaTech Descaler

20 litre

An inhibited acid de-scaling concentrate for the removal of calcium deposits in steam cleaning equipment.

Dwell
Used to Descaler the ThermaTech® Super-Heated Water System
Coverage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight
Storage

Restorative Enzyme Oil Digester

5 / 10 litre container

An enzyme (biological) based cleaner for the removal of oil and grease from porous substrates.

Dwell
Brush applied. Allowed to dwell until residue begins to mobilise. Not for use on Asphalt
Coverage
¼ Litre per square metre. More if it is more porous
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Restorative Exterior Algae Remover

5 litre concentrate

Water soluble concentrate, primarily for the removal of algae and other biological growths.

Dwell
After applying, leave for 1 to 3 days during the green and black growth will slowly disappear if applied correctly
Coverage
Apply diluted per 1 litre - 8 to 10 square metres
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Surface Treatment / Stone Repairs

Vulpex Liquid Soap (Concentrate)

1 litre

Safe, non-acidic, deep searching cleanser for all surfaces and materials.

Dissolves and emulsifies dirt, soot, grease.

Soluble in water or White Spirit.

Dwell
N/A
Coverage
N/A
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Working temperature range from 5-20C. Avoid direct sunlight.

Renaissance Wax

200 ml

A spirit based, 'non-yellowing' wax treatment, formulated for the conservation field. 

Dwell
This is a sacrificial product which is applied and left. If removal is required, it yields under temperature with superheated water/steam
Coverage
N/A
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Stone Repair - Powder Component

20 kg

Available in a range of colours and tones.

Restorative Stone Repair Mortar allows quick and easy repair of natural stone.

When dried, the product can be worked in the same way as stone, to blend with the surroundings.

Dwell
Initial set will commence in as little as 10 minutes, particularly in warm weather. Dwell time will normally be 36+ hours
Coverage
Ensure surface for repair is clear loose material and the edges square cut to a depth not less than 10mm
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Stone Repair - Liquid Component

7 Litre

See powder Component for information.

Dwell
See Stone Repair Powder component for general advice
Coverage
See Stone Repair Powder component for general advice
Storage
Ensure product is stored at, or brought up to working temperatures prior to use. Ideal working temperature range from 5-25C. Avoid freezing and direct sunlight

Testing

Universal Indicator Papers 1-11 pH

20-strip book

Single colour strips for determining pH of liquids and wet surfaces.

Universal Indicator Papers 1-14 pH

20-strip book

Single colour strips for determining pH (1-10, 12 & 14) of liquids and wet surfaces.

Universal Indicator Strips 0-14 pH

Triple colour test strips for more accurate determination of solution pH.

Water Hardness Indicator Strips

Test strips for determining 0-500ppm.

Brushes & Sponges

Melamine 'Magic' Sponge

A semi-sacrificial cleaning pad with barbed fibres that lift surface deposits without causing damage to the substrate.

Approx. dry size 100 x 60 x 20 mm.

‘Pork or Lamp Chop’ Brush

Shaped wooden handle, Small size, Stainless Bristle Brush.

Popular conservators brush for various tasks.

Converging Brush [3-Row]

Wooden handle, Medium size, Stainless Bristle Brush (moderately stiff).

For various cleaning tasks.

‘Scrub-Type’ Brush

Ergonomic, Nylon Bristle Brush.

For various cleaning tasks.

‘Nail-Type’ Brush

Small Nylon Bristle Brush (moderately stiff).

For various cleaning tasks.

Churn Brush

Medium sized Nylon Bristle Brush with handle.

For various cleaning tasks / mortar finishing.

Circular ‘Scrub-Type’ Brush

Ergonomic, circular, Nylon Bristle Brush.

For various cleaning tasks.

Abrasives

Restorative Dolomite Abrasive 140

25 kg

140µ.

Mineral Name Dolomite or Calcium Magnesium Carbonate - Naturally occurring White Mineral.

Used for cleaning and lighter coating removal.

Mohs Hardness - 4.

Restorative Calcite Abrasive 140

25 kg

140µ.

Mineral Name Calcite, Marble or Calcium Carbonate - naturally occurring White Mineral.

Used for cleaning, but not coating removal.

Mohs hardness - 3.

Restorative Aluminium Silicate Abrasive 180

25 kg

180µ.

Waste by-product predominately black with pale grey and gold coloured granules.

Synthetic mineral with a vitreous appearance.

Best suited for light coating removal and cleaning of tough substrates; sometimes used for bronze cancer.

Mohs Hardness - 7.

Restorative Aluminium Silicate Abrasive 250

25 kg

250µ.

Waste by-product predominately black with pale grey and gold coloured granules.

Synthetic mineral with a vitreous appearance.

Best suited for coating removal and cleaning of tough substrates. Not suitable for terracotta.

Mohs Hardness -7.

Restorative Aluminium Silicate Abrasive 500

25 kg

500µ.

Waste by-product predominately black with pale grey and gold coloured granules.

Synthetic mineral with a vitreous appearance.

Mohs Hardness - 7.

Restorative Aluminium Silicate Abrasive 1000

25 kg

1000µ.

Waste product predominately black with pale grey and gold-coloured granules.

Synthetic mineral with a vitreous appearance.

Mohs Hardness - 7.

Restorative Recycled Glass Abrasive 0.0-0.2

25 kg

0.0-0.2mm.

Recycled glass of varying colours; clear, green, amber, blue & purple.

Abrasive is clean & free of paper fibres, important for maintaining free flow through Jos systems.

Mohs hardness - 6.

Restorative Recycled Glass Abrasive 0.2-0.5

25 kg

0.2-0.5mm.

Recycled glass of varying colours; clear, green, amber, blue & purple.

Abrasive is clean & free of paper fibres, important for maintaining free flow through Jos systems.

Mohs hardness - 6.

Restorative Recycled Glass Abrasive 0.5-1.0

25 kg

0.5-1.0mm.

Recycled glass of varying colours; clear, green, amber, blue & purple.

Abrasive is clean & free of paper fibres, important for maintaining free flow through Jos systems.

Mohs hardness - 6.

Restorative Recycled Glass Abrasive 1000

25 kg

Recycled glass of varying colours; clear, green, amber, blue & purple.

Abrasive is clean & free of paper fibres, important for maintaining free flow through Jos systems.

Mohs hardness - 6.

Restorative Walnut Shell Abrasive

25 kg

450µ.

Restorative Sodium Bicarbonate Abrasive

25 kg